R12P-II
12 inch active full range speaker
ApplicationsSmall FOH (Front of House)
Stage Monitor
Near-Field Sound
FeaturesSelf-powered Full Range Speaker
Elastic Bass from Long Throw Rubber Edge LF Driver
Rotatable 80x50° Directivity Horn
Built-in Amplifier and DSP (Digital Signal Processor)
Technical SpecificationsFrequency Response: 55 Hz ~ 18 kHz (±3 dB) / 40 Hz ~ 20 kHz (-10 dB)
Nominal Coverage: 80° × 50°
Maximum SPL: 122 dB SPL, 128 dB SPL peak
Channel Gain:
CH1 (LOW): 26 dB
CH2 (HI): 20 dB
Peak Power: 8 × 500W @ 4Ω + DSP
Input Impedance: 18 kΩ balanced / 9 kΩ unbalanced
THD+N (0.1W to 1/2 power): <0.05%
Signal to Noise Ratio: >98 dB
Common Mode Rejection Ratio: >50 dB
Voltage Requirement: 200-240 VAC 50 Hz
Drivers:
LF: 1 × 12" woofer (75mm voice coil)
HF: 1 × 1.75" (1" throat) exit compression driver (44mm voice coil)
Physical DataDimensions (H×W×D): 616 × 400 × 410 mm / 24" x 16" x 16"
Weight: 25 kg / 55 lbs
Rigging: M8 top + 35mm bottom
Materials: 15mm, 18mm Baltic birch plywood
Finish: Black Polyurea paintings
Grille: Black epoxy mesh grille with acoustically