R10P-IIactive 10 inch full range speaker
ApplicationsSmall FOH (Front of House)
Stage Monitor
Near-Field Sound
FeaturesSelf-powered Full Range Speaker
Elastic Bass with Long Throw Rubber Edge LF Driver
Rotatable 80x50° Directivity Horn
Built-in Amplifier and DSP (Digital Signal Processor)
Technical SpecificationsFrequency Response: 55 Hz ~ 18 kHz (±3 dB) / 50 Hz ~ 20 kHz (-10 dB)
Nominal Coverage: 80° × 50°
Maximum SPL: 118 dB SPL, 124 dB SPL peak
Channel Gain:
CH1 (LOW): 26 dB
CH2 (HI): 20 dB
PPeak Power: 8 × 500W @ 4Ω + DSP
Input Impedance: 18 kΩ balanced / 9 kΩ unbalanced
THD+N (0.1W to 1/2 power): 0.05%
Signal to Noise Ratio: >98 dB
Common Mode Rejection Ratio: >50 dB
Voltage Requirement: 200-240 VAC 50 Hz
Drivers:
LF: 1 × 10" woofer (75mm voice coil)
HF: 1 × 1.75" (1" throat exit) compression driver (44mm voice coil)
Physical DataDimensions (H×W×D): 566 × 360 × 410 mm / 22.2" x 14" x 16"
Weight: 22 kg / 48.5 lbs
Rigging: M8 top + 36mm bottom
Materials: 15mm, 18mm Baltic birch plywood
Finish: Black Polyurea paintings
Grille: Black epoxy mesh grille with acoustically