
R10P-III
active 10 inch full range speaker
- Built-in DSP & amplifier
for seamless sound control. - Elastic bass
delivers deep, punchy low frequencies. - Versatile applications
(FOH, stage monitor, near-field).
ZSOUND R10P – III
Applications
- Small FOH
- Stage Monitor
- Near-Field Sound
Features
- Self-powered full-range speaker
- Elastic bass
- Long-throw rubber edge LF driver
- Rotatable 80×50° directivity horn
- Built-in amplifier and DSP
Technical Specifications
Specification | Detail |
---|---|
Frequency Response | 55 Hz – 18 kHz (±3 dB), 50 Hz – 20 kHz (±10 dB) |
Nominal Coverage | 80°×50° |
Maximum SPL | 118 dB SPL, 124 dB SPL peak |
Channel Gain | CH1 (Low): 26dB, CH2 (Hi): 20dB |
Power Rating (AES) | 2×500W @ 4Ω + DSP |
Input Impedance | 18KΩ balanced / 9KΩ unbalanced |
THD+N (1W at ½ power) | <0.05% |
Signal-to-Noise Ratio | >98dB |
Common Mode Rejection Ratio | >50dB |
Voltage Requirement | 200–240VAC, 50Hz |
Drivers | LF: 1×10″ woofer (75mm voice coil), HF: 1×1.75″ (1″ throat exit) compression driver (44mm voice coil) |
Physical Data
Data | Detail |
---|---|
Dimensions (H×W×D) | 566×360×410 mm / 22.2×14×16″ |
Weight | 22 kg / 48.5 lbs |
Rigging | M8 top + 36mm bottom |
Materials | 15mm, 18mm Baltic birch plywood |
Finish | Black polyurea paint |
Grille | Black epoxy mesh grille with acoustically transparent fabric |
发表回复