P10

Two-way full range speaker

P12

P15

ZSOUND P Series: The Ultimate Two-Way Full Range Speaker for Bars and Stages

Walk into any busy bar or live venue at midnight, and you will instantly hear the difference between a sound system that merely plays loud and one that reproduces audio accurately. The two-way full range speaker—a professional speaker cabinet design that utilizes two distinct drivers (a larger woofer for lower frequencies and a smaller compression driver for high-frequency notes) to cover the entire audible sound spectrum—is the absolute workhorse of these demanding environments.

Technical Specification

Parameter NameParameter Value
FREQUENCY RESPONSE70 Hz-18 kHz (±3 dB), 55 Hz-20 kHz (-10 dB)
NOMINAL COVERAGE (-6 dB)50°-100°(H), ±55°(V) Constant directivity
SENSITIVITY (@1w/1m)95 dB SPL
POWER RATING (AES)350W
NOMINAL IMPEDANCE8 ohm
MAXIMUM SPL126 dB (peak)
DRIVERSLF: 1 x 10″ (75mm voice coil) wooferHF: 1 x 44mm voice coil compression driver

Physical Data

Parameter NameParameter Value
Dimensions (HxWxD)486 x 316 x 338 mm / 19″ x 12″ x 13″
WEIGHT19 kg / 42 lbs
CONNECTORS2 x NL4MP Neutrik Speakon connectors
SPEAKER CABLES1+1-
MATERIALS18mm, 24mm birch plywood
FINISHBlack polyurea paintings
GRILLEBlack epoxy mesh grille with acoustically reticulated foam
RIGGING13x M8 rigging points, Pole mount socket
DIAGRAMSImpedance graph; Front, Top, Side views provided

Technical Specification

Parameter NameParameter Value
FREQUENCY RESPONSE60 Hz-18 kHz (±3dB), 50 Hz-20 kHz (-10dB)
NOMINAL COVERAGE (-4dB)50°-100°(H), 55°(V) Constant directivity
SENSITIVITY (@1w/1m)96 dB SPL
POWER RATING (AES)400W
NOMINAL IMPEDANCE8 ohm
MAXIMUM SPL128 dB (peak)
DRIVERSLF: 1×12″ (75mm voice coil) wooferHF: 1x44mm voice coil compression driver

Physical Data

Parameter NameParameter Value
Dimensions (HxWxD)576 x 372 x 384 mm
WEIGHT23 kg / 51 lbs
CONNECTORS2 x NL4MP Neutrik Speakon connectors
SPEAKER CABLES1+1-
MATERIALS18mm, 24mm birch plywood
FINISHBlack polyurea paintings
GRILLEBlack epoxy mesh grille with acoustically reticulated foam
RIGGING13x M8 rigging points, Pole mount socket
DIAGRAMSFront, Top, Side views and dimensions provided

Technical Specification

Parameter NameParameter Value
FREQUENCY RESPONSE60 Hz-18 kHz (±3dB), 45 Hz-20 kHz (-10 dB)
NOMINAL COVERAGE (-6dB)50°-100°(H), 55°(V) Constant directivity
SENSITIVITY (@1w/1m)98 dB SPL
POWER RATING (AES)450W
NOMINAL IMPEDANCE8 ohm
MAXIMUM SPL130 dB (peak)
DRIVERSLF: 1 x 15″ (75mm voice coil) wooferHF: 1 x 44mm voice coil compression driver

Physical Data

Parameter NameParameter Value
DIMENSIONS (HxWxD)706 x 446 x 446 mm / 28″x18″x18″
WEIGHT31 kg / 68 lbs
CONNECTORS2 x NL4MP Neutrik Speakon connectors
SPEAKER CABLES1+1-
MATERIALS18mm, 24mm birch plywood
FINISHBlack polyurea paintings
GRILLEBlack epoxy mesh grille with acoustically reticulated foam
DIAGRAMSImpedance chart; Front, Top, Side views with dimensions provided

The ZSOUND P Series, comprising the P10, P12, and P15 models, refines this classic acoustic format to deliver an exceptional two-way full range speaker tuned specifically for environments where vocal clarity and music dynamics are critical.


Fatigue-Free Audio Performance for Extended Listening

Most commercial speakers are tuned to sound impressive during a brief five-minute demonstration, but they quickly become harsh at high volumes. When selecting a two-way full range speaker for a commercial venue, fatigue-free audio is critical. Each model in the P Series is an advanced two-way full range speaker engineered to prevent listener fatigue (the gradual psychological and physical ear strain that causes audiences to feel uncomfortable after hours of loud music exposure).

The frequency response of this point source speaker line is carefully smoothed out in the harsh upper-midrange region. The compact P10 reaches down to 70 Hz (±3 dB), the versatile P12 handles down to 60 Hz, and the powerful P15 extends down to 60 Hz (with a -10 dB limit of 45 Hz). This tuning allows kick drums and bass guitars to retain their physical impact without the biting, metallic treble that often ruins cheaper setups. With honest AES power ratings (the standardized measurement of continuous power handling) ranging from 350 W to 450 W, this two-way full range speaker series delivers incredible headroom up to 130 dB peak SPL.


Rotatable Asymmetrical Horn for Flexible Room Coverage

A great two-way full range speaker must be highly adaptable to various room shapes. The P Series achieves this flexibility through its unique asymmetrical, rotatable horn (the internal waveguide structure that directs high-frequency sound waves). This horn provides a constant directivity coverage pattern of 50° to 100° horizontally by 55° vertically, meaning it maintains a consistent coverage angle across its entire frequency range.

Because the waveguide is asymmetrical, this two-way full range speaker throws more sound energy toward the far end of the room while minimizing reflections off nearby ceilings and floors. Furthermore, because the horn is rotatable, installers can easily adjust the dispersion pattern. If you need to mount the two-way full range speaker horizontally close to a low ceiling, you can simply rotate the horn 90 degrees to keep the sound directed at the audience’s ears rather than the side walls. When placed on its side on a stage deck, the same cabinet functions as a highly controlled stage monitor wedge that keeps sound concentrated on the performer rather than spilling into open microphones.


Multi-Point Rigging Options for Simple Installation

Installing a professional cabinet can be a time-consuming process if mounting points are limited. To solve this, every ZSOUND P Series is equipped with 13 separate M8 rigging points (reinforced threaded holes designed for attaching heavy-duty suspension hardware) and a standard pole-mount socket.

Whether you need to suspend the two-way full range speaker vertically over a dance floor, mount it horizontally against a wall, or pole-mount it directly over a subwoofer, the hardware is ready to go. The cabinets are built from durable 18mm to 24mm birch plywood coated in a rugged polyurea finish. This robust build keeps the weight of this two-way full range speaker manageable, ranging from 19 kg to 31 kg, allowing a single technician to safely handle setup and positioning on tight project schedules.

To complement your audio installation, integrating reliable entertainment lighting solutions can drastically enhance the overall sensory experience of your venue without complicating the system design.


Choosing the Ideal Two-Way Full Range Speaker Model

While every cabinet in this range shares the same premium design DNA, choosing the right two-way full range speaker model depends on your physical space and low-end reinforcement needs:

Speaker ModelWoofer SizeContinuous Power (AES)Peak SPL OutputCabinet Weight
ZSOUND P1010-Inch350 W126 dB19 kg
ZSOUND P1212-Inch400 W128 dB23 kg
ZSOUND P1515-Inch450 W130 dB31 kg

Each speaker can operate independently for speech and light music playback. For venues that require deeper bass extension, pairing this speaker with a compact active subwoofer like the ZSOUND S12P creates a highly efficient system. The S12P features a built-in three-channel amplifier and DSP module that can power and tune two external full-range cabinets, eliminating the need for bulky external amplifier racks.


Invest in a Versatile Two-Way Full Range Speaker Today

Whether you are designing a sound system for a house of worship, a busy nightclub, or a multi-purpose community theater, the ZSOUND P Series provides the performance you need. This premium two-way full range speaker combines fatigue-free acoustics, customizable dispersion control, and robust mechanical construction into a single, highly adaptable package that will keep your audience engaged night after night.